This tutorial has step by step pictures showing how you can weave star shaped traditional plastic wire baskets that were common in India a couple of decades ago. (நட்சத்திர வடிவில் பிளாஸ்டிக் சரடு கூடை பின்னுவது எப்படி).
Since I wanted this to be a very detailed tutorial, I have added about 50 pictures. So it might take a little longer to load this page.
If you grew up in India before the advent of plastic carry bags, you might have seen these. These baskets were used to carry groceries.
This basket is slightly more complicated than
So if you are entirely new to basket weaving, you might want to try one of those two projects first.
I have used 2 colors to make this basket. You can use as many as you want.
We will need a total of 40 pieces of wire (20 yellow and 20 green in my case). Each piece is 3 meters long. The tension of the wire has to be correct while making knots. If you are new, take 3.25 meters of the green wire as it travels longer distance.
Now we will make the base of the basket
(கூடை அடி போடுவது எப்படி)
After cutting the pieces, I have used the remaining yellow wire as the running wire to make the base of the basket. This basket is different from the other two baskets that we saw earlier. Here we will be using running wire only for the base. The sides of the basket will be woven diagonally like this sling bag.
To make the base, we will be knotting the cut wires to the running wire.
Leave 50 cms of running wire and start knotting the cut wires. I will be adding 10 yellow wires followed by 20 green wires followed by 10 more yellow wires.
The tutorial for this knot can be found here in a separate article (to prevent this tutorial from getting too long).
Continue adding the cut wires. Fold the cut wire into half and knot it with the running wire.
Begin adding the green wires.
After making 20 knots with green wire, add 10 more knots with yellow wire.
Allow 50 cms and cut the running wire. At this point, your basket’s base should look like this.
IMPORTANT: The first line should be the middle line of the base.
Subsequent lines in the base will be added on both sides of this middle line. Or you won’t have enough wire to finish one side of the basket.
Now we will make the second row. Allow 3 inches of running wire and start making the square knots like shown below.
Now we have reached the end of the second line.
Instead of cutting the running line, turn it around and make a knot with the first line. You will see a triangle forming.
Go around the middle line (first line) and make another knot to start the 3rd line. Again you will see a triangle forming.
Close up view. This will be the first knot of the 3rd line.
You will see 2 triangle shaped spaces in between the knots. This means we have successfully turned the corner on this side of the basket.
Continue the 3rd line.
We have now reached the end of the 3rd line.
Just like we did on the other side, turn around and make a knot with the end / side wire of the middle line.
First triangle on this side has been formed.
Now loosen the first knot of the second line to allow the running wire to pass through it on the back side. Include the running wire and add the knot that you unraveled again.
This is slightly tricky but don’t worry, the next two pictures are close up images and you will be able to see what I mean.
Second triangle has been formed in this side.
You can see the wire passing through the backside of that knot.
We have now turned the corners of the base and also completed 3 lines. The difficult part is over. The rest of the lines will simply be added in circles.
Continue with the 4th line.
Your base will look like this at this point. There will be two short wires (50 cms) on the sides. They will be used only in the base of the basket.
You can see the corner of the base here.
Since we added 20 green knots in the middle, the standard practice is to have 20 lines in the base of the basket. So add 10 lines on each side of the first line of the base.
Weaving the sides of the basket
Now we have completed the base of the basket. We won’t be needing the running wire anymore. Leave 3 inches and cut it off.
Now take the 10th and 11th green wire and make a knot. It will be right in the middle of the basket.
Like we did for the diagonally woven sling bag, we will continue to knot wires that intersect each other like shown below. This will create diamond shaped patterns in the basket.
The diamond is growing. At the same time, can you see the corners of the basket getting pulled up? They are no longer sitting on the floor.
Close up view.
Green diamond is done. Continue to weave all the lines from this side.
You can see the yellow diamond forming above the green diamond.
One side is done. Like I mentioned above, the short wires on the sides of the first line of the base will not be used for the sides of the basket.
Repeat the same for the other side of the basket.
Second side is growing.
Second side has been completed.
Joining the two sides of the basket
Now we will join the two sides and also form the star shape.
Ignore the short wires and make a knot between the two sides. The hanging short wire will be tucked into this knot later.
Continue making knots with all the green wires.
You can see the pointed star shape emerging.
Repeat on the other side.
Once all the points of the stars are completed, tuck the wires in. Cut them at an angle and it will be easier to lace them through the knots.
One side done.
Second side is getting tucked in.
Do the same for the green wires. The green wire travels longer from the middle so you will notice that we used up more of the green wires than the yellow wires.
The basket will look like a square box on the inside.
If you liked this tutorial, please share it with your friends.